4″ Round Fire Rated Regressed Backlit LED 9W 5CCT

MODEL: LFR-4R-RB-9W-5CCT Category: Fire Rated

Spec Sheet

Spec Sheet LFR-4R-RB-9W-5CCT

Product Features

2 Hour Fire Rated without additional housing or hardware
All Steel Heat Resistant Casing provides up to 2 Hour Fire Protection
Intumescent Gasket for additional sealing in case of fire
3/8″ Regressed for Reduced Glare
1 1/4″ Thick – Install in Limited Ceiling Spaces
Heavy Duty Steel Spring Clips for secure installation
1 1/2″ Spring Height for installations on 2 x 5/8″ drywall
Plenum Rated Cable for Commercial Installations
Type IC, Air-Tight & Wet Location Rated
Driver Inside Connection Box – No Junction Box Needed
5 CCT User Selectable Light Colors
CRI 90+ for True Color Rendering
Backlit for even higher efficacy up to 117 lm/W
c ETL us certified
3 Year Warranty

Where to Buy

Technical Specifications

Specifications:

Applications Multi-Family Residential, Basements & Commercial
Energy Used 9 W
Color Temperature (K) 2700 – 3000 – 3500 – 4000 – 5000
Light Output (lm) 960 – 1060 – 1080 – 1100 – 1080
Halogen Equivalent 90 W
Beam Angle 100°
CRI 90+
Driver Input 120V AC 50/60 Hz
Dimming TRIAC Dimmers 10% – 100%
Junction Box Volume 9.69 cubic inches / Max 5 No 12 AWG or 8 No 14 AWG
Approved Location Insulated Ceiling & Wet Locations
Cable FT6 / CMP Plenum Rated
Air Tight & Type IC Yes
Ambient Temperature -4°F (-20°C) to +104°F (+40°C)
Projected Life 70% Light Output at 50,000 Hours
Certification cETLus
Fire Rating UL 263-2011(R2022), STM E119-20 & CAN/ULC-S101-14
Warranty 3 Year

DIMENSIONS:

ID 4″, OD 5 1/8″, Cut Out 4″ to 4 1/4″
Fixture Thickness: 1 1/4″
120V Triac Dimmable Driver Included

Installation

INSTRUCTIONS FOR PROPER ASSEMBLY
Cut a circular opening in the gypsum ceiling such that the annular space between the ceiling membrane and the fixture does not exceed 1/8 inch.
Ensure penetrations do not exceed 100 square inches in any 100 square feet of ceiling area.
Install with a minimum separation of 4 feet between units.
Maintain a minimum 1 inch space between the edge of the fixture and closest structural member.